Corporations registered under the
National Greenhouse and Energy Reporting Act 2007 (NGER Act) are required to report greenhouse gas emissions, and energy production and consumption to the Clean Energy Regulator, by 31 October each year. By 28 February each year, the Clean Energy Regulator publishes a point-in-time extract of scope 1, scope 2 emissions, and energy production data specific to the electricity sector for the previous financial year.
Unlike the corporate emissions and energy data set, which is published at a controlling corporation level, the electricity sector emissions and production tables below are published at a designated generation facility level. This includes primary fuel source, emissions intensity and grid connection for each generator, as well as aggregated emissions and production for the entire sector.
Information as reported to the Clean Energy Regulator as at 28 February 2019.
The Clean Energy Regulator defines the following terms for the purposes of electricity emissions and production data:
Designated generation facility: A designated generation facility is a facility where the principle activity is electricity production. Facilities that generate electricity for their own use or as a secondary activity are not considered a designated generation facility and therefore not included in this publication.
Emissions intensity: Emissions intensity data is defined as reported scope 1 emissions divided by reported electricity production. Electricity production is based on total generation reported through National Greenhouse and Energy Reporting, including electricity used by the facility. The emissions intensities in this report are based on data as reported to the Clean Energy Regulator and no adjustment has been made to reflect any specific circumstances. Emissions intensities elsewhere are more typically measured (including by AEMO) based on energy sent out to the grid, which results in a higher emissions intensity per designated generation facility.
Grid-connected: Grid-connected refers to connection to a designated electricity network, defined as: the National Electricity Market, the South West interconnected system, the North West interconnected system, the Darwin to Katherine network, and the Mount Isa-Cloncurry supply network for the purposes of the safeguard mechanism.
Designated generation facility aggregates: If a report submitted under the National Greenhouse and Energy Reporting scheme contains a facility aggregate, and does not include disaggregated information for individual facilities, data will be published at the aggregated level.
Designated generation facilities cannot apply to have their facility level data withheld under section 25 of the NGER Act.
From 2014–15, the Clean Energy Regulator has published total electricity production and emissions data to provide greater transparency in terms of how the sector is tracking in relation to the sectoral baseline as set under the safeguard mechanism.
Under the safeguard mechanism,
a sectoral baseline will apply collectively to grid-connected generators until it is exceeded. Under the
National Greenhouse and Energy Reporting (Safeguard Mechanism) Rule 2015 the sectoral baseline is set at 198 million tonnes carbon dioxide equivalent, based on electricity sector’s emissions from 2009–10 to 2013–14. Sectoral emissions will be compared with the
sectoral baseline from 2016–17 onwards.
In 2017–18, total reported scope 1 emissions from grid-connected generators was 167 million tonnes carbon dioxide equivalence.
About The Clean Energy Regulator
Carbon Farming Initiative
Carbon Pricing Mechanism
National Greenhouse And Energy Reporting
Renewable Energy Target
Emissions Reduction Fund
Our Systems And Their Resources
Clean Energy Markets
Data and information
Emissions Reduction Assurance Committee
Subscribe to email updates
Information Publication Scheme
Freedom of Information
The Clean Energy Regulator is a Government body responsible for accelerating carbon abatement for Australia.